We use a regular plastic push pin and attach the decoration with an industrial adhesive and let it cure for 2 days. The pin shaft is about 3/8" long which goes into the cork, and the head is about 1/2". The decoration or embellishment is added to the head.

With this method, we can offer many different kinds of mediums and materials. Most of these are not adaptable to inserting a shaft directly into the medium.

The uniqueness of our selections add such interest and personality to bulletin boards, and the extra depth just makes the cute push pins POP OUT more and give longer life by making it easier to insert and remove.

Board Image

All Bulletin Boards are made after the order is placed.  A backing of 1/4" plywood is bonded to 1/2" of a sturdy but lightweight pressed pulp paper product for increased durability and support of decorative push pins then bonded to 1/4" quality cork.   The final thickness is about 1".  The chosen fabric is then stretched around all sides of the bonded base and securely attached to the back.  If ribbons are chosen, they are attached in the selected configuration.  The back is then covered with a coordinating felt and two "D" rings are added for hanging.

Loading...